ProBee-ZU10  Firmware Version PTv1.5 Release Notes
February 22, 2012

Copyright (c) 2010 ~ 2012, Sena Technologies, Inc.

INTRODUCTION
=============
These release notes describe new features added and bugs fixed since the firmware PTv1.4 release.

ENHANCEMENTS
==============
+ Changed the factory default value of ATS11 and AT+FLOWCTRL.

BUG FIXES
=========
- Fixed the problem with AT+AI on none and S/W flow control mode.

KNOWN BUGS
===========
* None.

REVISION HISTORY
================
PTv1.4 September 29, 2011
+ Added AT+RSSI Command.
+ Changed the range of RSSI value at the AT+ESCAN result.

PTv1.3 August 22, 2011
+ Increased the number of child nodes a coordinator or a router from 5 to 10.
+ Changed the response for AT+DSCAN to send child node information with the 16-bit Node ID from the 32-bit IEEE address.
+ Added the feature to display all the non-printable data in command mode by encoding them with printable format.
+ Added the feature always to permit joining by changing the default value of Permit Joining Timeout(ATS22) from 60 to 255.
- Fixed the problem in AT+UPDATEKEY command.
- Fixed the problem in losing data on receiving chunk data in command mode.

PTv1.2 November 5, 2010
- Fixed the problem in repairing the source route automatically.

PTv1.1 October 6, 2010
+ Initial Release

CONTACTS
=========
Sena Technologies Inc.
210 Yangjae-dong, Seocho-gu
Seoul, Korea 137-130

url: http://www.sena.com
email: info@sena.com
phone: +82-2-573-7772
fax: +82-2-573-7710

Technical support: 
email: support@sena.com
phone: +82-2-576-7362