HelloDevice PSx10 Series (PS110/410/810) Firmware Version 1.2.0.1 Release Notes
January 5, 2006

Copyright (c) 1998-2006, Sena Technologies, Inc.

INTRODUCTION
=============
These release notes describe new features added and bugs fixed since the firmware v1.2.0 release.


ENHANCEMENTS
==============
+ None

BUG FIXES
=========
- Some invalid booting commands are removed. (PS810)

KNOWN BUGS
============
* None


REVISION HISTORY
================
v1.2.0 November 25, 2005
+ Added the support for HelloDevice Manager 2(Monitoring function)
+ Added the support for send break function in telnet mode.
+ Added the configuration menu for response of following AT command in modem emulation mode,
ATSn?, ATSn=x,AT&Cn,AT&Wn, AT&Zn=x
+ Added an option to disable command echo in modem emulation mode
+ Added an option to specify a delay time for command echo in modem emulation mode.
- Fixed the problem with transmitting data in RS485 mode.(PS110/PS410)

v1.1.1 Septempber 27, 2005
- Fixed the incorrect signal status of internal RS485 Tx pin in PS110/PS410. 
- Fixed the problem with transmitting data under high loaded network condition in PS110/PS410.

v1.1.0 Septempber 07, 2005
+ Added a support for the PS810. 
+ Added a support for the phone number to host address mapping table in the modem emulation mode.
+ Added a status of serial port mode on serial port configuration page.
+ Added extended input formats for ATD(T) command in modem emulation mode. 
+ Responses to some AT commands in modem emulation mode are changed. 
Please refer to the manual for detail response to the AT commands.
+ Added options for custom CONNECT string configuration in modem emulation mode. 
+ Port enable/disable information is sent to the locating server. 
+ Port enable/disable status and UART types are displayed on serial configuration page. 
+ Added device name and IP address to the email notification.
+ Added login success/fail messages when port authentication is enabled.
- Fixed the data loss problem in case of multiple remote host connections. 
- Fixed the data loss problem in modem emulation mode when SSLv3 is enabled. 
- Fixed the communication problem in RS485 mode. 
- Fixed the problem with applying the inter-character time out option. 
- Fixed the typo error in bios menu. 
- Fixed the problem in using the NTP function. 
- Fixed the problem in changing serial baud rate via Serial/IP.
- Fixed the problem in using Web UI under HTTPS.


v1.0.0 July 12, 2005
+ Initial Release

CONTACTS
=========
Sena Technologies Inc.
210 Yangjae-dong, Seocho-gu
Seoul, Korea 137-130

url: http://www.sena.com
email: info@sena.com
phone: +82-2-573-7772
fax: +82-2-573-7710

Technical support: 
email: support@sena.com
phone: +82-2-573-5422