HelloDevice PSx10 Series (PS110/410/810) Firmware Version 1.4.2 Release Notes May 27, 2008 Copyright (c) 1998-2008, Sena Technologies, Inc. INTRODUCTION ============= These release notes describe new features added and bugs fixed since the firmware v1.4.0 release. ENHANCEMENTS ============== + The factory reset switch works when the switch is pressed for 2 seconds (PS110/410) + Reduced the elapsed time in converting from RS485 TX mode to RS485 RX mode (PS810) BUG FIXES ========= - Fixed the memory leak related with the ntp (PS110/410) - Fixed the problem that break signal was not transmitted in the RS485 mode(PS110/410) - Fixed the problem in the date and time configuration (PS810) - Fixed the problem that the serial port configuration is not applied (PS810) KNOWN BUGS ============ * The SNMP authentication trap and SNMP login trap is not generated (PS810) REVISION HISTORY ================ v1.4.0 June 8, 2007 + Added a configuration management menu to import and export system configuration + Added an ability to support for SSL client authentication in server-side and client-side + Added a Web configuration menu to upload certificates and private key + Added AT&T, AT&T0 and AT&T1 commands to the modem emulation mode. These commands is available for the Telnet binaray mode connection in the modem emualtion mode. + Added a default data mode option in the modem emulation configuration. This option decides whether the initial data mode of modem emulation is Telnet binary mode. + Added ATDS, ATDR, ATAS and ATAR commands to the modem emulation mode. By using these commands, users are able to force the TCP connection to be non-SSL connection even if the SSL is enabled. Please refer to the menual for detail description. + Added AT+net, AT+gateway, AT+date and AT+dns commands to the modem emulation mode. These commands is available for IP configuration and date and time settings. + Added a support for Socket ID string in TCP and UDP mode. + Added an ability to support Serial/IP through Proxy servers and NAT. + Added an ability to enable or disable TCP nagle algorithm. + Added a SNMP enable/disable option in the SNMP configuration. + Added a IP filtering policy option in the IP filtering configuration. - Fixed the data loss problem in DHCP mode - Fixed the problem with ip filtering configuration in the editconf - Fixed the problem that the flow control setting wasn't changed from Hardware to None. - Fixed the problem that the PS110 and PS410 occasionally go down. - Fixed the problem that the Max. allowed connection wasn't applied in the UDP mode. - Fixed the issue that PSx10 couldn't connect to some SSL servers such as stunnel. - Fixed the problem that the Transmit error count increases abnormally v1.2.0 November 25, 2005 - Some invalid booting commands are removed. (PS810) + Added the support for HelloDevice Manager 2(Monitoring function) + Added the support for send break function in telnet mode. + Added the configuration menu for response of following AT command in modem emulation mode, ATSn?, ATSn=x,AT&Cn,AT&Wn, AT&Zn=x + Added an option to disable command echo in modem emulation mode + Added an option to specify a delay time for command echo in modem emulation mode. - Fixed the problem with transmitting data in RS485 mode.(PS110/PS410) v1.1.1 Septempber 27, 2005 - Fixed the incorrect signal status of internal RS485 Tx pin in PS110/PS410. - Fixed the problem with transmitting data under high loaded network condition in PS110/PS410. v1.1.0 Septempber 07, 2005 + Added a support for the PS810. + Added a support for the phone number to host address mapping table in the modem emulation mode. + Added a status of serial port mode on serial port configuration page. + Added extended input formats for ATD(T) command in modem emulation mode. + Responses to some AT commands in modem emulation mode are changed. Please refer to the manual for detail response to the AT commands. + Added options for custom CONNECT string configuration in modem emulation mode. + Port enable/disable information is sent to the locating server. + Port enable/disable status and UART types are displayed on serial configuration page. + Added device name and IP address to the email notification. + Added login success/fail messages when port authentication is enabled. - Fixed the data loss problem in case of multiple remote host connections. - Fixed the data loss problem in modem emulation mode when SSLv3 is enabled. - Fixed the communication problem in RS485 mode. - Fixed the problem with applying the inter-character time out option. - Fixed the typo error in bios menu. - Fixed the problem in using the NTP function. - Fixed the problem in changing serial baud rate via Serial/IP. - Fixed the problem in using Web UI under HTTPS. v1.0.0 July 12, 2005 + Initial Release CONTACTS ========= Sena Technologies Inc. 210 Yangjae-dong, Seocho-gu Seoul, Korea 137-130 url: http://www.sena.com email: info@sena.com phone: +82-2-573-7772 fax: +82-2-573-7710 Technical support: email: support@sena.com phone: +82-2-573-5422