Using the Redirector :: The Serial/IP Control Panel

Using the Control Panel

To open the Serial/IP Control Panel

• In the Serial/IP program group in the Windows Start Menu, click the Control Panel shortcut.
  
  OR

• In the Windows System Tray, right-click the Serial/IP icon and click the Configure command.
  
  OR

• In the Windows Control Panel, open the Serial/IP applet.

To configure a virtual COM port

1. Open the Serial/IP Control Panel.

2. Select a virtual COM port in the list at the left.

3. View or change configuration settings for this virtual COM port.

4. Your changes are recorded within 2 seconds.

5. To apply the settings of the current virtual COM port to other ports, click Copy Settings To and select the ports to receive the settings.

To configure Advanced Options

1. Open the Serial/IP Control Panel.

2. Click Advanced.

3. In the Advanced Settings window, select a tab and change settings.

4. To record your changes, click OK.

 Notes

If the Serial/IP Redirector has been installed with the Administrator-Only Mode feature, the Serial/IP Control Panel will be available only to users with Administrator privileges.

Changed settings do not affect the operation of currently active virtual COM ports.