NotesUsing the Redirector :: The Configuration Wizard
Starting with a few basic settings that you provide, the Configuration Wizard detects and interrogates the serial device server to help you determine the correct settings of important redirector options.
In the Serial/IP Control Panel:
Select a virtual COM port in the list.
In User Credentials, select Use Credentials Below, if the server requires login.
Click Configuration Wizard.
In the Configuration Wizard window:
If the following settings are not correct, enter them now:
If the server requires a user login, type valid credentials in Username and Password.
Click Start.
As the Wizard runs, the Status panel shows a summary of server characteristics and the Log panel shows the Wizard's interaction with the server.
The Wizard indicates errors in the Status panel, with details in the Log panel. To run the Wizard again:
Analyze error messages in the Status panel. details
If necessary, analyze the messages in the Log panel. details
Correct the Wizard settings.
Click Start to run the Wizard again with those settings.
The Wizard indicates a successful run by messages in the Status panel and enabling the button Use Settings. To finish:
Click Use Settings to return to the Control Panel.
If User Credentials are being used, you can now change the source of these credentials as appropriate. details
The setting for Connection Protocol should be left as is.
The following settings may need to be set for your application, but only if the Wizard has not detected COM Port Control protocol support by the server:
If your application requires Restore Failed Connectoins, configure those settings. details
The setting for Security should be left as is.
NotesTo copy the contents of the Status and Log panels to the Windows clipboard, use the Copy button.
The only Advanced Options setting that affects the operation of the Wizard is Include Domain in Windows Credentials.
Related
Topics